Chapter 3
3. STEPS IN PAINTING A WATERCOLOR
No two artists paint alike. It would be presumptuous, therefore, to say how a picture
should be painted. But I can tell you how I proceed. Naturally, I adjust my method to
the particular subject at hand, but I do follow a general routine based on specific
procedures. The steps, explained in detail I the following pages, are as follows:
1. Choose a subject.
2. Plan the picture with a very small pencil sketch.
3. Pencil the composition on the full sheet.
4. Paint the whole picture simply in flat local colors.
5. Paint in the pattern of shadows or dark areas roughly.
6. Add the finishing touches.
CHOOSING A SUBJECT
For practice, any object will serve as a subject: a house, a tree, a doll, or
whatever is at hand. But if one is painting a serious picture, more care in selection is
needed. An artist who hopes to contribute to mankind’s store of art has no right to offer
a creation closely similar to one already painted. Whatever he presents should be his
own conception. Students frequently find it difficult to see a picture in the myriad details
confronting them. This is understandable, but the procedure is really simple. First
make sure that the subject possesses some individuality. Some feature or features
should be arresting: the atmospheric mood, the color combination, the architectural or
structural character, the dress of people, or some other aspect. The subject should not
be banal. Then, choose a scene that would make a picture as nearly complete as
possible. One can, of course, build a composition around any single item, depending
entirely upon his imagination for supporting material, but this calls for considerable time
and effort. So if you can find a subject that requires little change, it is foolish to reject it
for a less promising theme. Don’t waste time needlessly. It is better to approach your
subject with an open mind, ready to accept whatever is good rather than to demand
scenes that fit preconceived ideas.
So, assuming the prospective picture is to be a landscape (though the rules
apply to other classifications), cast about until you find something you consider striking.
It may be a hamlet in a valley or a cluster of trees about a house, or it may be nothing
more than a peculiar cast of light on an otherwise commonplace object. Then, having
found the distinguishing factor, look about to see if there are other secondary units in
the vicinity that might be combine with it satisfactorily. If not, look into your storehouse
of memory for whatever additional details are required.
PLANNING THE PICTURE
The scene before you should be used only as inspiration. If a part of the scene is
poor, you should not say later, “Well, that’s the way it was!” You must change or
eliminate any factors not helpful and add anything that may be needed.
Every work of art is a composition. A composition is not an accidental
arrangement. To lay out a composition––that is, to design the pattern of a picture––
start by making a small pencil sketch. This need not measure more than a few inches
and may take only a few moments, though more time may be needed. The sketch should be developed sufficiently to show that your composition is satisfactory and to
reveal what must be done in the final painting. This is very important. To essay the
painting of a large picture without some sort of pre-calculated guide demonstrates poor
planning and ensures a waste of time.
There are, of course, experienced artists who by just looking at a scene can
mentally change or rearrange it to make a good composition, but such artists are not in
the majority. A thumbnail plan is a necessity for most of us.
For your small sketch, first draw, in the middle of a paper, the part that you
consider indispensable, whatever it was that first attracted you. That is to be the heart
of your picture. It may be a barn, a panoramic group of objects, a doorway, or any of a
number of things. Keep the sketch small in relation to the size of the paper so that
when all other parts of the picture have been added white space will still surround it.
This is important. Otherwise, you will find your plan running over the edge of the paper.
Having drawn, simply and quickly, the most important feature––let is say, the
barn––add other components one at a time: a large tree behind the barn, a group of
bushes beyond, a small building to one side, mountains in the distance, rocks in the
foreground, and so on. Extract from nature those things that are good for your picture,
reject those that are useless, change the size, position, value, or contour of those only
partly acceptable. The sketch, meanwhile, is expanding outward in all directions from
the original note, the barn.
Now decide just where the picture should be lopped off––on the sides, at the top,
and at the bottom––for you have probably extended the sketch to include more ground
than the composition will need. Draw vertical and horizontal lines through the pencilled
sketch to mark the found boundaries. Keep the rectangle as small as possible,
excluding everything you can possibly do without.
Figure 3 shows how cardboard angles shaped like a carpenter’s square can be
useful in deciding the extent of the picture. Overlapping the two pieces to form a
rectangle, move them upwards, downwards and sideways on the diagram until the size
and arrangement seems satisfactory. By using these angle cards, you can change the
position of everything in the picture. How? Well, suppose the barn is in the center of
the picture and you don’t like it there. Moving the angle pieces to the left will have the
effect of moving the barn to the right; moving them up will place the barn nearer the
bottom of the picture; moving them down will show how the barn would look near the
top. And all these rearrangements can be tried without redrawing anything.
Once satisfied with the arrangement, draw a pencil line to mark the inner
boundaries of the angle pieces. Your composition plan is finished. If you wish, you can
roughly color the sketch. Sometimes this can be very helpful. A good small diagram is
the key to a successful painting.
This planning step may sound complicated but, in practice, it need not take more
than a few minutes.
PENCILING THE COMPOSITION ON THE FULL SHEET
Having carefully laid out a small sketch plan, you now reproduce that pattern on a large sheet of paper. Draw only enough to show the placement of the principal masses and picture components––no details––for the pencil lines will likely get lost in the painting process and the detail drawing, if any is required, can be done later with the brush. But accurate placement is important. Many students make large drawings whose proportions bear little relation to those on their painstakingly prepared pictureplan sketches. Of what use is a plan if it isn’t followed. If the horizon line is one-third the way up the picture in the small sketch, you don’t want it halfway or quarter-way up in the big picture. You want it one-third the way up––exactly.
LAYING IN THE LOCAL COLORS
Using simple flat washes, paint loosely the various picture areas in their general colors, being careful to keep them lighter than you want them so they can be developed later on. The whole picture, with the possible exception of the sky, should receive color. The colors need only be approximate, for they can be changed easily. The painting should be done in a broad manner––no niggling. If a small red spot belongs in the yellow hillside, slosh the weak yellow pain right over it. Remember, you are simply laying in the general color pattern.
LAYING IN THE SHADOW PATTERN
Most landscape pictures are made up of a pattern of sunlight and shadows or of lights and darks. The local color already applied represents, roughly, the lights. To add the darks, prepare a pan of “shadow color” (usually a warm gray mixture of brown and blue) and apply it flatly and loosely to the appropriate areas, using the same gray throughout, but adding a bit of local color wherever it is needed. This finished, you will be able to see and evaluate the entire composition and make plans for its completion.
DEVELOPING THE VARIOUS MASSES
Most compositions can be divided into definite units. A group of six trees standing alone might be one; a broad hillside another. Take any one unit, preferably the most important, and proceed to finish it. Consulting the scene before you, the range of colored masses already on the paper, and your mental conceptions, you must decide how strong to make the chosen are, what the exact colors should be, and how dark the values. The lightly applied color already on the paper can be loosened with water and manipulated without difficulty. Now repaint the darker colors somewhat more carefully, but not fussily. While the whole are is slightly moist, “model” or manipulate the whole mass into shape. This means putting the lights and darks and the colors into proper relation to each other and inserting the amount of detail decided upon. I can think of no better verb than “model” for this stage of the work. As the sculptor is able to model his plastic clay, changing it about until he is fully satisfied, the painter can model with pigment. Keeping it slightly moist, you can manipulate the color for an indefinite period, mopping out with a brush, cloth, tissue, or sponge, or even adding more color. You can push the color about with your thumb, scoop or scrape it out with a knife or razor blade, or modify it in any of a dozen ways. I have already mentioned applying a uniform “shadow color” to all dark areas of the picture, regardless of their local colors. Naturally, some shadows or parts of shadows must be darker than others. Now is the time to change their intensity. If you have a yellow house, for instance, which was originally painted an over-all yellow, with a strong war gray later applied to the parts in shadow, you can now model or manipulate that shadow to bring it to the exact strength desired, introducing a bit of the original yellow into the shadow color while it is still wet. In the work of beginners the shaded and lighted sides of a single object often are so different in color that they appear unrelated. The addition of a drop of local color to the gray shadow makes it a reasonable counterpart to the sunlit side. White surfaces in shadow should receive the same initial gray, but some of the gray should be mopped out with a brush or cloth while still wet. When the first area has been developed, go on to the others until the whole picture is virtually finished. If the sky was at first omitted, paint it now. The process described here helps to pull together the whole shadow pattern of the picture, thus avoiding “jumpiness,” a common compositional fault. After the various areas have been developed, you may still find a few parts out of line with the whole. The values of certain sections may require lightening or darkening, a color may need accenting or subduing, or a few light or dark accents may be needed here and there. When the corrections have been made, the picture is complete.
HOW I PAINT A WATERCOLOR
The Preliminary Sketch
The preparatory sketch is the plan for the finished picture. Sometimes a pencil sketch is enough, but in this case I made the sketch in watercolor, changing it by overpainting with opaque color until I was satisfied with the composition. The opaque white outline was drawn to indicate how much of the sketch would be included in the actual panting. With this sketch as a guide, I knew exactly what I wanted to do in painting my large picture.
Enlarging the Composition and Painting in the Local Color
The composition was enlarged from the original sketch. It was pencilled in very roughly with just enough line to show the positions of the masses, but with no details whatever. Next, the local color was applied very loosely with almost flat washes. No attempt was made to follow the pencil lines closely or to set down exact colors and values. The important point was to cover the paper with color and to register the big masses in approximately correct intensities, knowing that the color could later be modeled, changed about, lightened, darkened, brightened, neutralized, or even removed. My aim up to this point was to set down quickly on the paper a representation of the whole picture, for a picture must be a unit, not simply likenesses of a number of different things.
Laying in the Shadow Pattern and Developing Individual Areas
The shadow pattern was indicated roughly and simply, using a 1¼” flat sabeline brush, which was used for most of the painting. All of the areas of the picture were then developed individually––first the monument, then the right-hand evergreen, finally the house. With this done, the picture was finished except for a few last-minute corrections.
Finishing the Picture
In the final stage the trees were painted almost completely in pasty color that was pushed about with the thumb. The evergreen tree trunks and branches were scratched in the wet paint with a jackknife.





Leave a Reply